7/16" Billet 12pt Lug Nuts
Our 7/16" 12 Point Billet Aluminum Lug Nuts are manufactured from domestic 7075 material and come in polished aluminum and black anodized with a machined contrast cut. These billet lug nuts are available in a wide range of sizes including metric and offer a great complement to your racing wheels.
Available in 1/2" short shank (.460 long x .687 O.D.) and 3/4" long shank (.710 long x .687 O.D.) versions in 7/16" thread to meet the requirements of your vehicle and brand racing wheel. Also a wide range of spacer washers are available to get the correct fit and look you are looking for.
Our 7/16" Lug Nuts use a standard 3/4" 12 pt socket for plenty of clearance on most wheels. Outside diameter of the base of the lug nuts and washers is 1.200 and the Shank O.D. is .687.
IMPORTANT
- Make sure the threads on your studs are clean and not damaged in any way.
- Antiseeze is included with all of our lug nuts. You must use this to prevent gaulding.
- Nuts should be started by hand to prevent cross-threading.
- Stud threads should protrude a minimum of 1/8" out of the lug nut when fully torqued.
- Do NOT over torque your lug nuts as this can create an unsafe situation.
- Aluminum lug nuts are for racing applications only and not recommended for OEM / Street use.
Recommended Torque Values - using antiseeze
- 7/16" Lug Nuts - 85 ft lbs
- 1/2" Lug Nuts - 85 ft lbs
- 12 mm Lug Nuts - 85 ft lbs
- 14 mm Lug Nuts - 85 ft lbs
- 5/8" Lug Nuts - 100 ft lbs
Drag Race Solutions™ is a division of Collector Tethers™. Racers ourselves, we have seen a need for premium drag racing components while building our own cars that we feel can improve yours.
MADE IN U.S.A.